For those of you that don't know, I finally decided to upgrade my stock audio system in my car. I have been receiving my new equipment over the past couple of weeks, and my brother and I finally installed it this week. Since we had to learn as we went and did everything right and professional, the project took us probably like 60 man-hours bewteen the two of us, but after seeing the pics though I think you will understand why;) After researching I decided to go with a full Elemental Designs setup (except headunit): 1 13Kv.2 12" sub, a pair of eDi6500 component speakers w/ tweeter, powered by 2 NINe.2 amps. Headunit is a Pioneer AVH-p6800DVD 7" touchscreen 6-DVD changer with the Pioneer iPod adaptor that plays my iPod through my headunit. I also used 80 sq. ft. of v1SE2 deadening mat and two gallons v3 deadening paint...both Elemental Designs. Now I don't expect you guys to really understand any of that...so let me just show you.
First set of pics is of the deadening process. Since I have done so many performance mods i.e. cold-air intake, performance header, and test-pipe (no catalytic converter), my car has gotten pretty loud. In order to get full potential out of my system, we wanted to eliminate the road and exhaust noise. First step was to remove the entire interior down to the metal, then lay the deadening mat, and followed by two full gallons of deadening paint. Enjoy.




Next, we layed the deadening mat...


Followed by deadening paint...



Next we layed all the wire. We rewired everything included the stock speakers I did keep. Total we used about 300' of wire...this took the longest. All connections were soldered. Here is only a portion of the wiring.

Finally the finished product. A huge amount of work went into getting all this stuff in. Speaker box was custom made by my brother and I and carpeted to match the interior. For the door speakers I went from 5.25" to 6.5" meaning we had to cut the sheet metal in the doors and fabricate custom baffles for the speakers. For the tweeters, I used my handy Dremel to cut the holes in the door panels so I could flush mount them.







Well there you go. Now you know why it took us so long. It was well worth the time because my new system is like an eargasm! I have never heard anything so beautiful! Thank god I am done though:)